Solved Problem on Bending moment and shear force

Submitted by tushar pramanick on Tue, 07/23/2013 - 12:33

GATE 2013 : Civil Engineering

Q. All members in the rigid-jointed frame shown are prismatic and have the same flexural stiffness EI. Find the magnitude of the bending moment at Q (in kNm) due to the given loading.

 

 

 

 

Ans: 25

Comments

Related Items

Solved Problem on Beams

Beam PQRS has internal hinges in spans PQ and RS as shown. The beammay be subjected to a moving distributed vertical load of maximum intensity 4 kN/m of any length anywhere on the beam. The maximum absolute value of the shear force...

Solved Problem on Beams

A uniform beam weighing 1800 N is supported at E and F by cable ABCD. Determine the tension ( in N) in segment AB of this cable ( correct to 1-decimal place).

Solved Problem on Beams

A uniform beam (EI=constant) PQ in the form of a quarter-circle of radius R is fixed at end P and free at the end Q, where a load W is applied as shown. The vertical downward displacement, δp, at the

Solved Problem on Trusses

The pin-jointed 2-D truss is loaded with a horizontal force of 15 kN at joint S and another 15 kN vertical force at joint U, as shown.Find the force in member RS (in kN ) ...

Solved Problem on Riveted joints

A single riveted lap joint of two similar plates as shown in the figure below has the following geometrical and material details. width of the plate w = 200 mm, thickness of the plate t = 5 mm, number of rivets n = 3, diameter of the rivet dr = 10 mm ...