Solved Problem on Beams

Submitted by tushar pramanick on Tue, 07/23/2013 - 14:36
Share icon

GATE 2013 : Civil Engineering

Q. Beam PQRS has internal hinges in spans PQ and RS as shown. The beammay be subjected to a moving distributed vertical load of maximum intensity 4 kN/m of any length anywhere on the beam. The maximum absolute value of the shear force (in kN) that can occur due to this loading just to the right of support Q shall be:

 

Options: (A) 30   (B) 40   (C) 45   (D) 55

 

Ans:

Tags

Comments

Related Items

Solved Problem on Bridge Circuits

A strain gauge forms one arm of the bridge shown in the figure below and has a nominal resistance without any load as Rs = 300 ohm . Other bridge resistances are R1 = R2 = R3 = 300 ohm ...
DC circuit

Solved Problem on DC Motors

The separately excited dc motor in the figure below has a rated armature current of 20 A and a rated armature voltage of 150 V. An ideal chopper switching at 5 kHz is used to control the armature voltage ...

Solved Problem on OP-AMPS

In the circuit shown below the op-amps are ideal. Then determine the value of Vout in Volts.

Solved Problem on OP-AMPS

In the circuit shown below what is the output voltage (Vout) in Volts if a silicon transistor Q and an ideal op-amp are used?
ArticlePage

GATE Syllabus for Chemical Engineering (CH)

Graduate Aptitude Test in Engineering, 2013. Syllabus for Chemical Engineering (CH). ENGINEERING MATHEMATICS:- Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigenvectors etc . CHEMICAL ENGINEERING Process Calculations and Thermodynamics etc