Solved Problem on OP-AMPS

Submitted by tushar pramanick on Tue, 07/23/2013 - 00:24

GATE 2013 : Electrical Engineering

Q. In the circuit shown below what is the output voltage (Vout) in Volts if a silicon transistor Q and an ideal op-amp are used?

Options: (A) -15 (B) -0.7 (C) +0.7 (D) +15

 

 

 

Ans:  B

Comments

Related Items

Solved Problem on Strength of Materials

A rod of length L having uniform cross-sectional area A is subjected to a tensile force P as shown in the figure below. If the Young’s modulus of the material varies linearly from E1 to E2 along the length of the rod, the normal stress developed at the section-SS is

Solved Problem on Bridge Circuits

A strain gauge forms one arm of the bridge shown in the figure below and has a nominal resistance without any load as Rs = 300 ohm . Other bridge resistances are R1 = R2 = R3 = 300 ohm ...

Solved Problem on DC Motors

The separately excited dc motor in the figure below has a rated armature current of 20 A and a rated armature voltage of 150 V. An ideal chopper switching at 5 kHz is used to control the armature voltage ...

Solved Problem on OP-AMPS

In the circuit shown below the op-amps are ideal. Then determine the value of Vout in Volts.

GATE Syllabus for Chemical Engineering (CH)

Graduate Aptitude Test in Engineering, 2013. Syllabus for Chemical Engineering (CH). ENGINEERING MATHEMATICS:- Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigenvectors etc . CHEMICAL ENGINEERING Process Calculations and Thermodynamics etc