Solved Problem on Beams

GATE 2013 : Civil Engineering

Q. A uniform beam (EI=constant) PQ in the form of a quarter-circle of radius R is fixed at end P and free at the end Q, where a load W is applied as shown. The vertical downward displacement, δ_p, at the loaded point Q is given by: [tex]{\delta _p} = \beta (\frac{{W{R^3}}}{{EI}})[/tex]. Find the value of β (correct to 4-decimal places). __________

Ans: 0.785 to 0.786

Log in or register to post comments
11 views

Comments

Solved Problem on Foundation Engineering

A multistory building with a basement is to be constructed. The top 4 m consists of loose silt, below which dense sand layer is present up to a great depth. Ground water table is at the surface. The foundation consists of the basement slab of 6 m width which will rest on the top ...

A propped cantilever made of a prismatic steel beam is subjected to a concentrated load P at mid span as shown. Q1. If load P= 80 kN,find the reaction R(in kN) (correct to 1-decimal place)using elastic analysis.

Solved Problem on Soil Mechanics

Two different soil types (Soil 1 and Soil 2) are used as backfill behind a retaining wall as shown in the figure, where γt is total unit weight, and c' and φ' are effective cohesion and effective angle of shearing resistance

Solved Problem on Soil Mechanics

The soil profile above the rock surface for a 25o infinite slope is shown in the figure, where su is the undrained shear strength and γt is total unit weight. The slip will occur at a depth of

Solved Problem on Soil Mechanics

The soil profile below a lake with water level at elevation = 0 m and lake bottom at elevation = -10 m is shown in the figure, where k is the permeability coefficient. A piezometer (stand pipe) installed in the sand layer shows a reading of +10 m elevation.