Elecrical Circuit Theory and Networks | BengalStudents

Contents

1.			Basic Circuit Elements and Waveforms
	1.1		Circuit Components
	1.2		Definitions of Electrical Circuits
	1.3		Conservation of Energy
	1.4		Source of Electrical Energy
	1.5		Standard Input Signals
	1.6		Sinusoidal Signal

2.			Mesh and Node Analysis
	2.1		Kirchhoff's Laws
	2.2		Source Transformation
	2.3		Mesh and Node Analysis
	2.4		Network Equations for RLC Network
	2.5		Magnetic Coupling

3.			Graph Theory and Network Equation
	3.1		Incidence Matrix
	3.2		Cut-Set Matrix
	3.3		Tie-Set Matrix and Loop Currents
	3.4		Trees of a Graph
	3.5		Analysis of Networks
	3.6		Network Equilibrium Equation
	3.7		Duality
	3.8		General Network Transformations

4.			Fourier Series
	4.1		Trigonometric Fourier Series
	4.2		Evaluation of Fourier Coefficients
	4.3		Waveform Symmetry
	4.4		Fourier Series in Optimal Sense
	4.5		Exponential Form of Fourier Series
	4.6		Fourier Transform

5.			The Laplace Transform
	5.1		Laplace Transformation
	5.2		Some Basic Theorems
	5.3		Gate Function
	5.4		Impulse Function
	5.5		Laplace Transform of Periodic Functions

6.			Application Laplace Transform
	6.1		Solution of Linear Differential Equation
	6.2		Heaviside's Partial Fraction Expansion
	6.3		Kirchhoff's Laws
	6.4		Solution of Network Problems

7.			Network Theorems
	7.1		Superposition Theorem
	7.2		Reciprocity Theorem
	7.3		Thevenin's Theorem
	7.4		Norton's Theorem
	7.5		Millman's Theorem
	7.6		Maximum Power Transfer Theorem
	7.7		Substitution Theorem
	7.8		Compensation Theorem
	7.9		Tellegen's Theorem

8.			Resonance
	8.1		Series Resonance
	8.2		Parallel Resonance

9.			Analogous System
	9.1		Mechanical Elements
	9.2		D'Alembert's Principle
	9.3		Force-Voltage Analogy
	9.4		Force-Current Analogy
	9.5		Mechanical Couplings
	9.6		Electro-Mechanical System
	9.7		Liquid-Level System

10.			Two-Port Network
	10.1		Characterization of Linear Time-Invariant Two-Port Networks
	10.2		Open-Circuit Impedance Parameters
	10.3		Short-Circuit Admittance Parameters
	10.4		Transmission Parameters
	10.5		Inverse Transmission Parameters
	10.6		Hybrid Parameters
	10.7		Inverse Hybrid Parameters
	10.8		Interrelationships between the Parameters
	10.9		Interconnection of Two-Port Networks
	10.10		Two-Port Symmetry
	10.11		Input Impedance in terms of Two-Port Parameters
	10.12		Output Impedance
	10.13		Image Impedance
	10.14		Transistors as Two-Port Active Network
	10.15		Network Components

11.			Attenuators
	11.1		Nepers, Decibels
	11.2		Lattice Attenuator
	11.3		T-Type Attenuator
	11.4		π-Type Attenuator
	11.5		L-Type \|ittenuator
	11.6		Ladder type Attenuator
	11.7		Balanced Attenuators
	11.8		Insertion Loss

12.			Conventional Filters
	12.1		Image Impedance
	12.2		Hyperbolic Trigonometry
	12.3		Propagation Constant
	12.4		Properties of Symmetrical Network
	12.5		Filter Fundamentals

13.			Convolution Integral
	13.1		Graphical Convolution

14.			State Variable Analysis
	14.1		Transfer Function
	14.2		State Transition Matrix
15.			Network Functions
	15.1		Poles and Zeros
	15.2		Transient Responses

16.			Passive Network Synthesis
	16.1		Driving Point and Transfer Impedence Function
	16.2		LC Network
	16.3		Two Terminal R-L and R-C Network

17.			Feedback System
	17.1		Block Diagram Representation
	17.2		Signal Flow Graph
	17.3		Routh-Hurwitz Stability Criterion

452 views

Tags

Related Items

Engineering Mechanics

1. Fundamentals of Mechanics | 2. Elements of Vector Algebra | 3. Important Vector Quantities | 4. Equivalent Force Systems | 5. Equations of Equilibrium | 6. Introduction to Structural Mechanics

Digital Electronics

The term Digital is probably most often associated with a computer.

Magnetic Coupling

A magnetic coupling is a coupling where energy can be transferred from one circuit to another, not connected through any physical mechanical connection but using magnetic flux

Circuit Components

RESISTOR: Resistor is energy absorbing element in electrical circuit. It's unit is ohm. INDUCTOR: Inductor is an energy storing element in electrical circuit. It's unit is henry.

Kirchhoff's Laws

Kirchhoff's laws simply deal with voltage drops and rises with the current flowing in a circuit by using the ideas of simple energy conservation. These laws are very helpful in determining of the output response for network analysis.