Solved Problem on OP-AMPS

Submitted by tushar pramanick on Tue, 07/23/2013 - 00:34

GATE 2013 : Electrical Engineering

Q. In the circuit shown below the op-amps are ideal. Then Vout in Volts is

Options: (A) 4 (B) 6 (C) 8 (D) 10

 

 

Ans: C

Comments

Related Items

Solved Problem on Foundation Engineering

A multistory building with a basement is to be constructed. The top 4 m consists of loose silt, below which dense sand layer is present up to a great depth. Ground water table is at the surface. The foundation consists of the basement slab of 6 m width which will rest on the top ...

Solved Problem on Beams

A propped cantilever made of a prismatic steel beam is subjected to a concentrated load P at mid span as shown. Q1. If load P= 80 kN,find the reaction R(in kN) (correct to 1-decimal place)using elastic analysis.

Solved Problem on Soil Mechanics

Two different soil types (Soil 1 and Soil 2) are used as backfill behind a retaining wall as shown in the figure, where γt is total unit weight, and c' and φ' are effective cohesion and effective angle of shearing resistance

Solved Problem on Soil Mechanics

The soil profile above the rock surface for a 25o infinite slope is shown in the figure, where su is the undrained shear strength and γt is total unit weight. The slip will occur at a depth of

Solved Problem on Soil Mechanics

The soil profile below a lake with water level at elevation = 0 m and lake bottom at elevation = -10 m is shown in the figure, where k is the permeability coefficient. A piezometer (stand pipe) installed in the sand layer shows a reading of +10 m elevation.